? coilcraft, inc. 2010 specifications subject to change without notice. please check our website for latest information. high current air core inductors document 625-1 document 625-1 revised 10/20/10 srf dcr part inductance 2 q 2 typ 3 max 4 i rms 5 wt number 1 5% (nh) typ (ghz) (mohm) (a) (mg) ga3092-al_ 3.7 120 17.5 2.0 7.0 150 ga3093-al_ 6.6 107 5.8 2.0 7.0 220 ga3094-al_ 12.0 105 2.4 2.0 7.0 280 ga3095-al_ 17.5 115 2.2 2.0 7.0 390 1. when ordering, please specify packaging code: ga3095-al c packaging: c =7 machine-ready reel. eia-481 embossed plastic tape (250 parts per full reel). b = less than full reel. in tape, but not machine ready. to have a leader and trailer added ($25 charge), use code letter c instead. d =13 machine-ready reel. eia-481 embossed plastic tape (1000 parts per full reel). factory order only, not stocked. 2. l and q measured at 150 mhz, 0.1 vrms, 0 a using an agilent/hp 4291a impedance analyzer with an agilent/hp 16193a test fixture. 3. srf measured using an agilent/hp 8722es network analyzer and a coilcraft smd-d test fixture. 4. dcr measured using a micro-ohmmeter. 5. current that causes a 15c temperature rise from 25c ambient. 6. electrical specifications at 25c. refer to doc 362 ?soldering surface mount components? before soldering. terminations rohs compliant tin-silver over copper ambient temperature ?40c to +125c with i rms current, +125c to +140c with derated current storage temperature component: ?40c to +140c. packaging: ?40c to +80c resistance to soldering heat max three 40 second reflows at +260c, parts cooled to room temperature between cycles temperature coefficient of inductance (tcl) +5 to +70 ppm/c moisture sensitivity level (msl) 1 (unlimited floor life at <30c / 85% relative humidity) mean time between failures (mtbf) 1 billion hours packaging 250/7 reel; 1000/13 reel plastic tape: 16 mm wide, 0.35 mm thick, 12 mm pocket spacing, 4.9 mm pocket depth pcb washing only pure water or alcohol recommended the use of heavy gauge wire allows these parts to have the lowest dcr and highest current ratings of our air- core inductors. they offer q values over 100 from 100 mhz to 1 ghz. request free evaluation samples by contacting coilcraft or visiting www.coilcraft.com.
? coilcraft, inc. 2010 specifications subject to change without notice. please check our website for latest information. document 625-2 document 625-2 revised 10/20/10 air core inductors l vs frequency q vs frequency irms derating 0 25 20 15 10 5 1 10 100 1000 10000 inductance frequency (mhz) 17.5 nh 6.6 nh 3.7 nh 12.0 nh 0 250 200 150 100 50 1 10 100 1000 10000 q factor frequency (mhz) 17.5 nh 6.6 nh 3.7 nh 12.0 nh -40 -20 0 20 40 60 80 100 140 120 ambient temperature (c) 120 110 100 90 80 70 60 50 40 30 20 10 0 25c percent of rated rms i dimensions are in inches mm 0.21 5,33 max 45 min 135 max soldered lead length recommended land patterns 0.22 5,59 max 0.23 5,84 0.060 1,524 0.235 5,969 0.19 4,83 max 0.23 5,84 0.060 1,524 0.205 5,207 ga3092-al ga3093-al ga3094-al ga3095-al 0.175 4,45 0.175 4,45 max max 0.195 4,95 max 0.195 4,95 max 0.195 4,95 max 0.195 4,95 max 0.23 5,84 0.060 1,524 0.180 4,572 0.23 5,84 0.060 1,524 0.180 4,572
|
